Neuman & Esser Group
|
- comressors dry and oil lubricated running
for all process gases and PET units
- packaged units for compression of air,
CO2, all other technical gases
- suction volumes up to 25.000 m3/h, driving
power 15.000 kW and dicharge pressure up to 700 bar
- spare parts for compressors produced by LINDE,
SIHI-Halberg, GHH, DEMAG, MAFA Wurzen, A. Hofer
|
 |
Dosier- und Prozeßtechnik GmbH, Salzwedel |
- PAX metering pumps
- acided- and alkali-resistant, self-lubricating
- volumetric delivery 0,6 to 16.400 l/h up to 400 and viscosity up to 1.500 mm2/s
- automation system AUTODOP
|
 |
Geräte- und Pumpenbau GmbH,
Merbelsrod
|
- sealing production
- according costumers specific wishes
seal are produced for different sectors, including the chemical
industry, the paper- and cellulose-sewage treatment
|
 |
Oranienburger Pumpenfabrik GmbH
|
- Lateral blower
- capacity Vs = 80 - 300 m3/h,
diff.p to 20 kPa (vacuum), diff.p up to 40 kPa (pressure)
oilfree air supply, low noises, flexible installation for
watertreatment, fish breading plants, textile industry, dust exhauster
plats
- trunk-type motor blower
- capacity Vs = 80 - 260 m3/h diff.p up
to 40 kPa
- ORCUT-drainage submersible pump for robust operation, free of any blocking, easy installation and service
|
 |
MAG Plastic S.A.
Geneva |
- Modular Stretch Blow Moulding Systems
- The MB-System is designed to
produce-starting from all types of performs-biaxially oriented high
quality PET containers at a constant nominal output rate of 1.200
bottles per cavity. All Systems are expandable up to 25.000 bottles/hour,
PET bottle sizes from 0,2 to 3,0 l for mineral water, carbonated
drinks, fruit juices, edible oil, vinegar, wine, brandy, detergents,
agro-chemicals, etc.
|
 |
|
| |
 |
|
multi
turn actuators from 30Nm to 1.000Nm for gate valves and globe valves
|
| |
 |
|
part turn
actuators from 30Nm to 1.600Nm for ball valves, butterfly valves and
dampers
|
| |
 |
|
thrust actuators
from 5kN to 80kN for plug valves, flop gates and dampers
|
| |
|
|
bevel gear
boxes up to 16.000Nm, spur gear boxes up to 16.000Nm, worm gear boxes
up to 250.000Nm |
- DREHMO ®
- Actuators for multiple applications
Wherever liquid, gaseous or powdery medium is flowing through pipe-work,
several kinds of values are used to shut off or to regulate the rate
of flow.
For reliable remote operation of these values, which may be globe,
gate, ball or butterfly valves, DREHMO ® electromechanical
valve actuators are globally successfully on service for several decades.
Power generation, water treatment, oil and gas production and distribution
as well as the chemical and the petrochemical industry are fields
of application for DREHMO ® valve actuators.
|
 |
